EcoPoxy UVPoxy

from $39.56

UVPoxy®

Epoxy Coating for Woodworkers & Artists

Size:
Quantity:
Add To Cart

UVPoxy®

Epoxy Coating for Woodworkers & Artists

UVPoxy®

Epoxy Coating for Woodworkers & Artists

HIGH GLOSS TOP-COAT!

Epoxy Coating for Woodworkers & Artists

UV Resistant Coating Epoxy

UVPoxy has been formulated with a simple 1:1 mix ratio and is designed for tabletops, wood finishing, and fluid art. It is a high-performance, two-component, water-clear epoxy system that resists yellowing caused by the sun and other UV sources.

Use UVPoxy by itself for a water-clear finish or add our Liquid, Metallic, or Glitter pigments to create custom colors and effects. It is self-leveling and can quickly be built up in 3.2 mm (1/8") layers. 

With our ever-growing line of EcoPoxy pigments and accessories, we can support you with everything you need for your epoxy projects.

 Used to Create:

  • High-Gloss Topcoat for Woodworking Projects

  • Epoxy Inlays

  • Fluid Art Projects

  • Decorative Countertops

EcoPoxy UVPoxy: Epoxy Coating for Woodworkers & Artists

Premium UVPoxy Features

PERFECT FOR COATING

With a maximum thickness of ⅛”, UVPoxy is perfect for use as a self-leveling, high-build finish on epoxy woodworking and art projects.

RESISTS YELLOWING

UVPoxy is specially formulated to resist yellowing caused by sunlight and other ultraviolet light sources. While UVPoxy has been formulated to resist yellowing, it is not recommended for permanent outdoor applications.

WATER CLEAR

UVPoxy cures to a water-clear, high-gloss finish that is compatible with many substrates. UVPoxy will self-level to approximately 1/16” if the resin is allowed to run over the edges of the workpiece.

CREATE BEAUTIFUL DESIGNS

UVPoxy allows woodworkers and artists to create pieces that are as beautiful as they are functional. Add Liquid Color Pigments, Metallic Color Pigments, and Polyester Color Glitters to achieve stunning results.

Specifications

*Times are based on a 1.6mm (1/16”) thick coating. Individual project times may vary depending on coating thickness, ambient temperature, and humidity.

Usage Instructions

Mixing Application & Instructions

Mixing

In a clean, dry container combine (by volume) 1 part resin with 1 part hardener and mix thoroughly for 2-3 minutes. Add Liquid, Metallic, or Glitter pigments as desired and mix until evenly dispersed.

Application

Working area should be clean, dry, and free of dust. Settling dust can cause blemishes on the glossy surface. Pour UVPoxy onto the prepared surface and spread evenly. Use of a V-notched spreader is recommended to achieve a uniform finish at the desired thickness. A light pass with a torch can help release bubbles at, or near, the surface. UVPoxy can be applied up to 3.2mm thick (1/8”) per coat, using as many layers as needed to achieve the desired thickness. For best adhesion between layers, wait until the first layer is tacky to touch to apply another layer. If the first layer is already fully set to touch, sand with 220 grit sandpaper and wipe down before applying another layer. Recommended for indoor applications only.

Additional Tips & Tricks

Visit our Tutorials section for articles & videos on best ways to use our products.

What will you create with UVPoxy?

EcoPoxy Metallic Color Pigments, Mica Powder: Select Color
$10.76
EcoPoxy Mixing Cups
from $0.81
EcoPoxy Polyester Color Glitters, Mica Powder: Select Color
$8.60
EcoPoxy Pour Pail
$8.96
EcoPoxy FlowCast SPR
from $39.56