EcoPoxy SnowWhite
SnowWhite
Highly Pigmented, Pre-blended Casting Epoxy for Opaque Whites
15L
SnowWhite
Highly Pigmented, Pre-blended Casting Epoxy for Opaque Whites
15L
SnowWhite
Highly Pigmented, Pre-blended Casting Epoxy for Opaque Whites
15L
One-of-a-kind, Pre-blended Casting Epoxy for Opaque Whites
SnowWhite uses a simple 2:1 mix ratio and is highly pigmented. It has been formulated for large casting applications, such as river tables or large furniture pieces. The high opacity, pure white color beautifully contrasts wood grain in live edge projects and allows the reclaimed wood to shine.
SnowWhite is intended for pours of 13-38 mm (0.5-1.5”) per layer, with a maximum pour volume of 16 L (without the use of additional cooling). SnowWhite can be worked using the same tools you have in your woodshop.
With our ever-growing line of EcoPoxy pigments and accessories, we can support you with everything you need for your epoxy projects.
Used to Create:
Custom Furniture
River Tables
Decorative Art Pieces
Other Large Casting Projects
Premium SnowWhite Features
Specifications
*Times based on a 38mm (1.5”) deep casting at a volume of 14L. Individual project times may vary depending on pour depth, volume, ambient temperature, and humidity.
Usage Instructions
Mixing Application & Instructions
Mixing
Mix resin for 1 minute before adding hardener. Add hardener to resin pail and mix thoroughly for 4 to 5 minutes. For less than full kit mixing, a 2:1 by volume (3.1:1 by weight) mix ratio must be used. Always use hand and eye protection when working with or near epoxies.
Application
Working area should be clean, dry, and free of dust. SnowWhite can be poured at 13-38mm (0.5-1.5”) per layer. SnowWhite will not shrink while curing under normal conditions. However, it may slowly fill cracks and voids in live edge wood pieces, causing the resin level to drop. Be prepared to add more epoxy as needed.
Epoxy releases heat when curing. For pours of 16L or more, multiple thinner pours may be necessary to prevent overheating. Fans blowing across the curing epoxy may also be used to help dissipate heat. For best adhesion between layers, wait until the first layer is tacky to touch before pouring a second layer. If the previous layer is no longer tacky, sand with 220 grit sandpaper and wipe down before pouring another layer.
Additional Tips & Tricks
Visit our Tutorials section for articles & videos on best ways to use our products.