EcoPoxy FlowCast SPR

from $39.56

FlowCast® SPR

The Premium Casting Epoxy for Small Projects

Size:
Quantity:
Add To Cart

FlowCast® SPR

The Premium Casting Epoxy for Small Projects

FlowCast® SPR

The Premium Casting Epoxy for Small Projects

FOR ALL YOUR SMALL PROJECT NEEDS!

The Premium Casting Epoxy for Small Projects

Small Projects Casting Epoxy

FlowCast SPR has been formulated with a simple 2:1 mix ratio and is designed for small castings, allowing users to create projects with thinner profiles, such as coasters and serving trays. It can be combined with Liquid or Metallic pigments to create custom colors and effects.

FlowCast SPR is intended for pours from 6-25 mm (¼-1") per layer, with a maximum volume of 3 L. FlowCast can be worked using the same tools you have in your woodshop.

With our ever-growing line of EcoPoxy pigments and accessories, we can support you with everything you need for your epoxy projects.

Used to Create:

  • Serving Trays

  • Drink Coasters

  • Decorative Art Pieces

  • Other Small-Scale Live-Edge Casting Projects

Ecopoxy FlowCast SPR: Premium Casting Epoxy for Small Pours

Premium FlowCast SPR Features

PERFECT FOR SMALL POURS

With the ability to cast from ¼" to 1" thick per layer in pour volumes up to 3 L, FlowCast SPR is perfect for small-scale live edge wood projects.

FASTER CURING

FlowCast SPR has been formulated to cure faster making it the ideal casting epoxy for weekend projects. When used under the recommended conditions, and in accordance with Application Guide instructions, you can expect your project to be ready for finishing in a day.

BUBBLE-FREE CASTINGS

FlowCast SPR’s low viscosity provides excellent air release allowing trapped air to rise to the surface, significantly reducing bubbles in the cured casting.

OUTSTANDING TRANSPARENCY

FlowCast SPR cures to a highly desired transparent water-clear appearance. It can also be combined with Liquid and Metallic pigments to create custom colors and effects.

Specifications

*Times based on 38mm (1.5”) deep casting at a volume of 14L. Individual project times may vary depending on pour depth, volume, ambient temperature, and humidity.

Usage Instructions

Mixing Application & Instructions

Mixing

Shake Part B well before use. In a clean, dry container combine (by volume) 2 parts resin with 1 part hardener and mix thoroughly for 4-5 minutes. Add Liquid or Metallic pigments as desired and mix until evenly dispersed.

Application

Working area should be clean, dry, and free of dust. FlowCast SPR can be poured at 6-25 mm (¼-1”) per layer. FlowCast SPR will not shrink while curing under normal conditions. However, it may slowly fill cracks and voids in live edge wood pieces, causing the resin level to drop. Be prepared to add more epoxy as needed.

Epoxy releases heat when curing. For pours deeper than 25 mm (1") and/or at a volume greater than 3 L, multiple thinner pours may be necessary to prevent overheating. For best adhesion between layers, wait until the first layer is fully set to touch. Sand with 220 grit sandpaper and wipe down before pouring another layer.

Additional Tips & Tricks

Visit our Tutorials section for articles & videos on best ways to use our products.

What will you create with FlowCast SPR?

EcoPoxy UVPoxy
from $39.56
EcoPoxy Polyester Color Glitters, Mica Powder: Select Color
$8.60
EcoPoxy Metallic Color Pigments, Mica Powder: Select Color
$10.76
EcoPoxy FlowCast
from $197.96
EcoPoxy Pour Pail
$8.96