EcoPoxy FlowCast
FlowCast®
The Premium Woodworker's Epoxy for Thick Pours
FlowCast®
The Premium Woodworker's Epoxy for Thick Pours
FlowCast®
The Premium Woodworker's Epoxy for Thick Pours
BEST SELLER!
The Woodworker's Epoxy
The Woodworker’s Epoxy
FlowCast has been formulated with a simple 2:1 mix ratio and is designed for larger projects such as river tables, ocean tables, and encapsulated objects. It can be combined with Liquid or Metallic pigments to create custom colors and effects.
FlowCast is intended for pours of 13-38 mm (0.5-1.5”) per layer, with a maximum pour volume of 30 L (without the use of additional cooling). FlowCast can be worked using the same tools you have in your woodshop.
With our ever-growing line of EcoPoxy pigments and accessories, we can support you with everything you need for your epoxy projects.
Used to Create:
Custom Furniture
River Tables
Ocean Tables
Encapsulated Objects
Decorative Art Pieces
Ecopoxy FlowCast: Premium Epoxy for Thick Pours
Premium FlowCast Features
IDEAL FOR THICK POURS
With the ability to cast from ½” to 1½” thick pours, FlowCast is perfect for river tables, ocean tables, and any other deep pour or large casting application.
BUBBLE-FREE CASTINGS
FlowCast’s low viscosity provides excellent air release allowing trapped air to rise to the surface, significantly reducing bubbles in the cured casting.
OUTSTANDING TRANSPARENCY
FlowCast cures to a transparent water-clear finish. It can also be combined with Liquid and Metallic pigments to create custom colors and effects.
Specifications
*Times based on 38mm (1.5”) deep casting at a volume of 14L. Individual project times may vary depending on pour depth, volume, ambient temperature, and humidity.
Usage Instructions
Mixing Application & Instructions
Mixing
In a clean, dry container combine (by volume) 2 parts resin with 1 part hardener and mix thoroughly for 4-5 minutes. Add Liquid or Metallic pigments as desired and mix until evenly dispersed.
Application
Working area should be clean, dry, and free of dust. FlowCast can be poured at 13-38mm (0.5-1.5”) per layer. FlowCast will not shrink while curing under normal conditions. However, it may slowly fill cracks and voids in live edge wood pieces, causing the resin level to drop. Be prepared to add more epoxy as needed.
Epoxy releases heat when curing. For pours of 30L or more, multiple thinner pours may be necessary to prevent overheating. Fans blowing across the curing epoxy may also be used to help dissipate heat. For best adhesion between layers, wait until the first layer is tacky to touch before pouring a second layer. If the previous layer is no longer tacky, sand with 220 grit sandpaper and wipe down before pouring another layer.
Additional Tips & Tricks
Visit our Tutorials section for articles & videos on best ways to use our products.
